Por ahora, esta página solo está disponible en inglés.
S2ARM · RECURSOS DEL PROYECTO
Upstream releases
Summaries of S2Arm project GitHub releases, with links to the original release notes.
v0.6.1: Windows: Update N games / Update selected works again, and 4 more fixes
Windows: Update N games / Update selected works again. Mac: Update selected now reports a game that did not make it and lets you retry. Windows: the first launch after upgrading from 0.5 no longer says the game library is not set up. Mac: an occasional "device not found" during a push now falls back to another route. Same as 0.6.0: Mac with Apple silicon on macOS 15 or later; 64-bit Windows 10 or 11; iPhone / iPad on iOS / iPadOS 18 or later.
v0.6.0: One app for every game: install S2Arm on your phone once and every game lives in its library, and 28 more fixes
One app for every game: install S2Arm on your phone once and every game lives in its library. Snapshots: tap the translucent button at the top right in game to save the whole game state as it is right now; long-press it and choose to return to the last saved moment. Much faster Push to iPhone: a big game's program used to go over file by file (1,500+ files, about an hour). No more hitch in new scenes: shaders are precompiled for Apple GPUs at build time. .s2arm files: export any game as an .s2arm (with its .img) and import it on another device; the first time it starts, the app signs it with that device's own signing identity. Self-signing with AltStore / SideStore? Import games right on your phone: ① in AltStore or SideStore settings, export your signing certificate and set a password; ② open S2Arm, gear → Signing certificate → Import .p12…, pick the certificate and enter the password; ③ then put .s2arm and .img files (exported from your computer or shared by a friend) into S2Arm's Import Here folder and play. Self-signers can push games from the computer too: when S2Arm on your phone was installed by AltStore / SideStore, the launcher's console recognizes it and offers Send selected to iPhone, Export selected as .s2arm, Export S2Arm.ipa and Give the signing identity to the phone. Mac launcher signs in to your Apple ID itself: no Xcode account needed on Mac anymore. Multiplayer mode (community contribution, #1075, thanks SyunSS): iPhone and Mac settings add Multiplayer mode. Controllers: on Mac, Nintendo controllers (Switch Pro, Joy-Con and others) can now use the Xbox button layout (bottom to confirm, right to cancel), matching iPhone. In-game report button: on iPhone, a report button now sits right of the gear at the top left and opens the report form directly. Games start faster: the file checks before every start are gone. See what each game takes: Free up space in each game's "…" menu lists shader and build caches, the Mac version and built iPhone packages separately; tick what you don't need and click Free. If returning to a snapshot fails and the game starts fresh, you're told why instead of it silently falling back. Apple TV, one app too (experimental): S2Arm is installed once and each game is signed for Apple TV and pushed in. Windows: after adding a game, the new game is selected instead of jumping back to the previous game's build page. Windows: while one game is building, opening another goes to that game's own build page, where you can add it to the build queue; it starts automatically when the current build finishes. Mac: motion on original Joy-Con. Trine 5 (Mac): fixed graphical corruption after entering the game (same package compared on Mac before and after: the related error lines went from 8 to 0). Mac / iPhone: in some games that use very large memory pools, GPU compute effects could be missing or frozen and some objects could flicker or disappear (no crashes; Windows was not affected). Fixed a black screen after returning to a snapshot, seen on one big game; verified on Mac. 60 FPS turned on but stuck at 30: after one session dropped frames, every later session used to stay at 30 FPS, so the 60 FPS switch looked broken. Mac: an open-world game froze mid-battle and the picture broke into pieces. Mac: building wrote the internal disk full when the library was on an external disk. Games played only on Mac no longer get an "update the phone version" hint. Moving the game library to an exFAT or other non-APFS disk no longer fails. Windows: when antivirus or indexing software is holding a folder during a build, the build now waits for it instead of failing with "file or folder not accessible". Ori 2: occasionally crashes at start; being investigated. Get from SideStore (one-tap certificate import) hasn't been verified on a real device yet.
v0.5.8: Windows: signing in with an Apple ID was being rejected by Apple (error 403)
Windows: signing in with an Apple ID was being rejected by Apple (error 403).
v0.5.7: The 14 games that crashed at 60 fps with community frame-rate patches: packages you already built now regenerate their patches automatically after updating, so you no longer need to rebuild them by hand, and 1 more fix
The 14 games that crashed at 60 fps with community frame-rate patches: packages you already built now regenerate their patches automatically after updating, so you no longer need to rebuild them by hand. iPhone (iOS 26): folders created while pushing games now belong to S2Arm, so they can't become unwritable later.
v0.5.6: Mac / Windows "Update S2Arm on iPhone": if backing up saves before the update fails, you're again asked whether to "Continue anyway", and choosing it carries on with the update, instead of only offering "Retry" or "Export a self-signed package" and getting stuck, and 8 more fixes
Mac / Windows "Update S2Arm on iPhone": if backing up saves before the update fails, you're again asked whether to "Continue anyway", and choosing it carries on with the update, instead of only offering "Retry" or "Export a self-signed package" and getting stuck. When backing up saves before an overwrite install can't be done, S2Arm now tells you whether your Mac's disk is full or the game's saves are in cloud saves, instead of a vague "couldn't confirm". If a resource pack doesn't verify during building, S2Arm no longer refuses outright: it explains in yellow and builds anyway, and adds that clue if something fails later. When the game folder on iPhone can't be written, S2Arm first suggests opening S2Arm once and installing again; deleting and reinstalling the app is only needed if that doesn't work. Fixed crashes in some games on Apple silicon caused by a misaligned stack pointer. On M1 / M2, task / mesh shader stages in some games now run on compute shaders instead of the driver's software mesh path. Building now retries when renaming a folder on an external volume fails intermittently. Automatic quality levels: when no run mode is set at launch, handheld is assumed; a level lowered because the CPU couldn't keep up is no longer raised again during that session based on GPU headroom. The phone's various "update needed" cards are merged into a single "Update on your computer" card.
v0.5.5: S2Arm no longer refuses outright when a check doesn't match: importing games, pushing resource packs, pre-launch checks, controller mappings, shader update packs and downloads now explain in yellow which item didn't match and what it may affect, then carry on, and 21 more fixes
S2Arm no longer refuses outright when a check doesn't match: importing games, pushing resource packs, pre-launch checks, controller mappings, shader update packs and downloads now explain in yellow which item didn't match and what it may affect, then carry on. Saves: when restoring manually, a mismatched version / DLC combination or account now shows a notice and restores anyway; damaged files in a backup are skipped individually; a save that changed after you confirmed is still restored; and you're told clearly when cloud sync didn't overwrite. Deleting a game keeps its saves in every form. If the iPhone is locked when backing up saves before an install, S2Arm asks you to unlock it and waits (up to 2 minutes) before backing up. iPhone: the app restores write permission on its own folders and files as soon as it starts, instead of finding out during unpacking. iPhone: shader update packs that don't match the current game version are skipped with a note, and packs with many derived files are no longer rejected as a whole. When only the rewriter changes, S2Arm no longer rewrites every game in the background. Fixed a rewrite failure in some games by enlarging a key section even when the first pass leaves gaps. Windows in-app update: the launcher now reliably exits for the installer, and tells you if the last update didn't install. Windows signing: you're asked first before an action could revoke another development certificate on your account. Fixed an issue on macOS older than 27 when the Metal performance HUD is on. When a community frame-rate patch changes the swap interval, frames are now presented the way the patch intends. Fixed an occasional crash in some games when binding shaders. When a rewrite fails, its log is kept and included in "Report a problem"; the launcher cleans up temporary folders left by interrupted jobs when it opens; and leftover older build outputs are removed as soon as a build finishes. Developer recording is now off by default, so controller recordings no longer pile up on the phone. Mac: games start in handheld mode by default. Mac: per-game settings now include "Render resolution" and "Frame-rate cap" (same as iPhone). Mac: direct audio uses real-time scheduling again when plugged in or on desktop, and stays as before on battery. Library: games whose data didn't pass verification on import are marked in yellow (Mac / Windows); if the library's identity differs from what was recorded, S2Arm tells you which library it is and asks you to confirm. The phone's "Transfer interrupted" and "Game data needed" cards now explain how to resume; the "Increased memory limit" lost notice now gives steps for each install method. Visual and motion polish on the Mac home and build pages; the auto-download note now says updates install when you quit. Graphics and performance: Switch 2 video frames now feed frame pacing; stencil writes no longer invalidate depth copies; CPU textures re-upload only changed rows.
v0.5.4: Mac "Update S2Arm on iPhone": tapping update right after opening the launcher, while it was still preparing the update in the background, could stay stuck at about 16%, and 8 more fixes
Mac "Update S2Arm on iPhone": tapping update right after opening the launcher, while it was still preparing the update in the background, could stay stuck at about 16%. Fixed: when the iPhone was connected to the computer by both cable and Wi-Fi, pushing a game to it could randomly become very slow (a few MB/s). If some engine files bundled in the S2Arm app don't match, S2Arm no longer refuses to run and asks for a reinstall: it names the files, suggests reinstalling, and keeps going. iPhone: when a resource pack contains read-only folders or files, pushing now restores write permission instead of failing; if it still can't write, the message says it's the S2Arm app on the iPhone that needs deleting. Mac: after a game paused on losing focus (switching to another window), returning to it could leave no sound on some external displays. Mac: when you switch away and back, games now get more accurate focus messages, so some games no longer think they were sent to the background. iPad (iPadOS 27): some games occasionally crashed right as the first frame appeared. Before building, S2Arm now test-compiles a tiny shader, so if the Metal compiler on your Mac can't be used you're told right away instead of failing halfway. The space check before pushing now says the space "may not be enough by estimate".
v0.5.3: Mac: the work the launcher starts on its own after opening (preparing the S2Arm update for your iPhone, adding S-grade optimizations to Mac games) now runs one task at a time at low priority, and the number of parallel build lanes is capped by the memory currently free, so it no longer eats all memory and freezes or restarts the computer, and 17 more fixes
Mac: the work the launcher starts on its own after opening (preparing the S2Arm update for your iPhone, adding S-grade optimizations to Mac games) now runs one task at a time at low priority, and the number of parallel build lanes is capped by the memory currently free, so it no longer eats all memory and freezes or restarts the computer. Mac "Install on iPhone": with a free Apple ID (Personal Team), 0.5.2 could be rejected by the phone (error 0xe8008015, "A valid provisioning profile for this executable was not found"). When building, unaligned files in a game's resources are no longer copied into memory whole, so big games use much less memory while building. Mac: the old launcher no longer crashes as it quits during an in-app update, and the new version reopens by itself once installed. Mac: moving the app while the launcher is open (for example into the Applications folder) no longer crashes it. Mac: while a task is running, the system no longer pushes the launcher into the background, so pushing to the phone no longer slows down. Before pushing, S2Arm checks how much space is left on the phone and says so plainly when it isn't enough, instead of reporting a connection problem. When a game's resource pack is incomplete, S2Arm stops before the game starts and says why, instead of crashing in game. macOS 27 / iOS 27: some older games quit right at start with "address window too small"; they no longer quit for that reason. A community patch that was turned off automatically after a crash is no longer turned back on when you update the launcher. Mac: wired Xbox controllers are now supported natively. Mac: a controller's place in the panel is now its player number in the game, even if you swap controllers mid-game. Mac: when a Pro-style controller's factory calibration can't be read, pushing a stick all the way now counts as a full push. iPhone: an NS2 Pro controller keeps working alongside system controllers instead of being turned off. iPhone: split-screen no longer shows a reflection in the lower half, the fold shows a plain dark band, and iPhone Duo can use portrait split-screen held with the camera at the bottom. Mods: a "?" next to Import explains which mod formats are supported (Mac / Windows, works with a controller too); mods that are only a whole game executable now say plainly that they aren't supported. Mac: the settings button in the top bar only shows a red dot when something in the environment is missing. Mac library: games with an Apple TV build now have "Install on Apple TV" in the "…" menu (Apple TV is still an early preview, macOS only).
v0.5.2: After updating from 0.5.1, if the launcher doesn't reopen by itself, just open it once; the new version is already installed, and 7 more fixes
After updating from 0.5.1, if the launcher doesn't reopen by itself, just open it once; the new version is already installed. Fixed building the iPhone package for a new game failing while a phone is plugged in (error "'pack' is not a package"); Apple TV packages failed the same way. Mac: building Apple TV packages and exporting the Apple TV installer (.ipa) work now, and the Mac download includes the components Apple TV needs. Mac "Install on iPhone" now signs with your existing development profile first and only requests a new one when needed, so installs are faster. Mac "Update S2Arm on iPhone": when the phone isn't registered to your Apple ID and Xcode can't find it, S2Arm now names the phone and tells you what to do, instead of failing later with an English error. If you delete the game library folder, the Mac launcher goes back to the welcome page to set up a new library, instead of listing games that no longer exist. When unpacking fails, S2Arm now says why instead of just "tool failed". The Mac welcome page title and text now wrap to the window width instead of being cut off.
v0.5.1: Fixed "Update iPhone" failing for some Mac users while requesting the development provisioning profile, and 1 more fix
Fixed "Update iPhone" failing for some Mac users while requesting the development provisioning profile. Fixed an occasional graphics-related crash in some games.
v0.5.0: Redesigned Mac launcher: the home page is split into All games / Ready / Recently played / Favorites, search works by name, pinyin or title ID, and the whole launcher can be used with a controller, even a single Joy-Con, and 54 more fixes
Redesigned Mac launcher: the home page is split into All games / Ready / Recently played / Favorites, search works by name, pinyin or title ID, and the whole launcher can be used with a controller, even a single Joy-Con. Mod import: Mac, Windows and iPhone can import asset-replacement mods and turn each one on or off, and the export page on your computer also takes mods with code patches (pchtxt / IPS) and builds them into the game. Play time: the Mac and iPhone libraries show how long you've played each game and when you last played it, recorded only on your device and never uploaded (not on Windows in this release). No more .NET: the Mac version works right after installing, the Windows version no longer bundles the .NET runtime, and both downloads are smaller. Updates happen when you choose: the launcher only tells you when a new version is available and downloads and restarts when you click; it also only tells you when S2Arm on your iPhone has a new version, and updates it when you connect the phone and click. iPhone home-screen widget (4×2): your last game on the left and your three most-played on the right; tap a cover to start, or turn it off in the launcher settings on your computer. "After building" on the export page: with iPhone checked, choose "Install on iPhone" or "Export a self-sign IPA" (no phone needed), and a failed install can switch to exporting in one click. You can install another game on your iPhone while a build is running; only tasks that really conflict wait for each other. If the "Increased Memory Limit" permission is missing, S2Arm on your iPhone tells you at the top as soon as it opens, and "Learn more" shows how to keep it with each self-signing method. iPhone: choose the interface language in the library settings and the game language in each game's settings (only the languages that game supports). Rumble uses the left and right motors separately (Xbox, DualSense and others); on Mac, Xbox-style controllers such as 8BitDo or GameSir also provide motion in Switch mode. iPhone: if a game uses motion and there's no motion source, you're told once; a motion-capable controller is preferred, and the phone's gyroscope fills in only when the controller can't. Mac: controllers that GameController doesn't recognize (such as the Google Stadia controller) now work, with buttons mapped by position and adjustable in the button settings. Switch 2 Pro Controller (iPhone / iPad): if it won't connect, hold SYNC on top for a second or two and it connects. iPhone Duo inner screen and iPad: the picture follows the device orientation, including upside down. The Mac export page shows which port a game uses and lets you change back with "Change" after picking a third-party port; the D2R-Mobile port for Diablo II is updated to v2.3.3 and can be built on Windows too. iPhone "Auto" frame rate now goes up to 60 FPS; 120 FPS must be chosen by hand, and the settings page explains that a device that can't keep up will make the game run slower. Mac home: the main button has an icon and a label, the other actions share one style, and cards show how many days the iPhone signature has left or that it has expired. Faster builds for small games: about twice as fast on Windows and about a quarter faster on Mac. Downloads are about a third smaller: about 128 MB on Mac (189 MB in 0.4.5) and about 119 MB for the Windows installer (178 MB in 0.4.5). The program part of each game is now stored compressed: newly built games are stored this way right away, and games built with 0.4.x switch after their first "Update iPhone". Game data is compressed before it's pushed to the iPhone, unless that saves less than 15%. The computer side no longer sets its own permissions on its data folders and uses the system defaults, which also fixes "Access denied" on Windows when adding games and similar actions. Recovering supplement files from the phone: the Mac launcher still recovers the program modules a game fills in on its first run on the phone; the Windows launcher can't recover them in this release, so for such games you'll need to prepare the game once with the Mac launcher. If a game was deleted on this computer but is still on the phone, the install tells you which one. Exporting a self-sign package only writes the data of the game you clicked, and the result card names any other games that weren't written. iPhone can now use "lighter load" graphics patches (quality-raising ones stay Mac-only); they're off by default and can be turned on in the S-grade page. iPhone: files locked by the system are no longer moved automatically; you're told about it with three steps to free space. When a stuck game is stopped safely, the Mac launcher and the iPhone now say "The game got stuck and was stopped safely" and tell you how to keep playing and how to send us diagnostics with "Report a Problem", instead of showing "Done". Windows: when Impactor sign-in fails, you're told whether you're not signed in, the session expired, or Apple's servers can't be reached, with what to do for each. Windows: when installed on a drive other than the system drive (such as D:), the new version now opens by itself after an update. Windows: long tasks no longer fail midway with "Access denied". Windows: when antivirus or indexing software has a file open, moving folders waits and retries instead of failing the whole task. When the game's folder on the phone can't be written, the install now tells you to export your saves, delete and reinstall, then import them back, instead of asking you to continue again and again. Some games still drew at about 30 FPS with 60 FPS on. Frame-rate patches understand one more FPSLocker format and some wrongly built constants are fixed; if a patch can't be applied, the settings page says why. Mac (M1 / M2): some Switch 2 games could hang the GPU when lowering their resolution; we fixed what player diagnostics pointed to, but we have no M1 / M2 Mac to confirm it, so please upload diagnostics if it still happens. Mac: some games crashed while swapping frames. Some Switch 2 games on Mac grew to about 39 GB of memory and were stopped; they now use about 15.5 GB, and a GPU page fault on systems before macOS 26 is fixed too. Much lower graphics memory use in large Switch 2 games (one racing game on Mac dropped from about 16 GB to about 10.7 GB). A Switch 2 racing game crashed at launch when it set an automatic target frame rate. Mac / iPad: sessions were aborted when a large memory pool couldn't be created. iPhone: running out of memory while playing Switch 2 games. iPhone: crash when starting a game with a controller connected. iPhone: occasional in-game crashes on some devices. iPhone (iOS 18.0–18.3): a possible crash when building graphics pipelines for the first time, and the pipeline cache not being saved so every launch recompiled. Some games recompiled graphics pipelines on every launch and stuttered at the start. Occasional missing textures or graphics glitches after returning from the background. A flashing white haze over 3D scenes in some games when the render scale isn't 1x. iPad: motion aiming moved diagonally when turning left and right (since 0.4.2). Some OpenGL games crashed at start. iPhone: if a game file put into "Import Here" is damaged, you're asked to delete the game and put it in again. With a French, Japanese, Spanish or Traditional Chinese interface, the self-sign export folder was named in Chinese; it now uses English unless the interface is Chinese. "._" files created by macOS on exFAT / FAT drives were treated as mods and pushed again on every install. Controllers changed a lot in this release (navigation in the new interface, separate left/right rumble, motion on third-party controllers); if something doesn't work, please open an issue or upload diagnostics.
v0.4.5: S-grade full screen, frame-rate unlock and cheats now sit at the top (the gold card in Mac launch settings, the first level of the in-game gear menu on iPhone, and the S-grade card on the Windows export page), and 27 more fixes
S-grade full screen, frame-rate unlock and cheats now sit at the top (the gold card in Mac launch settings, the first level of the in-game gear menu on iPhone, and the S-grade card on the Windows export page). "Picture enhancement": iPhone's "Scaling filter" and Mac's "Enhanced picture mode" are now one setting with three levels: Standard (default, the former bilinear), For 2D games (the former nearest) and Sharp upscaling (MetalFX). Exporting a self-sign package is no longer an "install method": on Mac and Windows, "Export self-sign package" now sits next to "Install on iPhone" in the library and starts with one click; games without an iPhone build, or with an old-format one, are built first and then exported. Cheats you import yourself can be shared with other players (unchecked by default; nothing is shared unless you tick it). The S-grade upgrade now works with NUP and already-unpacked game files. Fixed some games in v0.4.4 not drawing a set of geometry (missing parts of the picture). 6 GB iPhones: fixed the next game freezing at start after the previous session ended abnormally (it wrote about 2.6 GB at start and froze within the first frames). Mac / iPhone: fixed some games hitting a GPU fault and being stopped safely mid-game (#1220): a kind of texture that was still in use was being moved out of GPU memory. iPhone: fixed a crash in some games when reading textures (D-TMRP). Fixed whole scenes not showing in some games after they change a depth setting mid-game (seen in 7 games in player diagnostics). iPhone: a game file put into "Import Here" with the Files app is no longer claimed while it is still being copied, and a game file with a damaged table is no longer unpacked anyway — you're asked to import it again (before, the whole game failed to install and retrying didn't help). iPhone: the "Import Here" folder was not created when the interface was in Spanish, French or Japanese. Shaders missed when building are now compiled the first time a game uses them (before, that part of the picture wasn't drawn, the game stuttered or even crashed). Mac: fixed one cause of a GPU hang in some games: drawings using mesh shaders were skipped the first time instead of waiting for the shader to be ready. Fixed community patch categories: some graphics and frame-rate patches were mistaken for full-screen patches and turned on by default (including on iPhone); one of them crashed a game during the opening cutscene of a new save. Some community patches that change sound or gameplay were previously turned on by default. If a community patch can't be read, only that patch is skipped instead of the whole build or S-grade optimization failing. A cheats folder that can't be written no longer crashes the whole game session. Quitting a game normally is no longer treated as "the last session ended abnormally" the next time. Mac: adding S-grade optimization in the background no longer blocks you from starting a game (before, you waited half a minute and then saw "Another task is using the game library"). iPhone: leftover files from an older version that block unpacking a game are now cleared automatically, and when unpacking fails the diagnostics include where it failed. Windows: importing a large Switch 2 game (NUP) no longer fails outright when antivirus or indexing holds a file during the last step; it waits and retries. The Mac launcher no longer downloads updates in the background and installs them when you quit. iPhone: the "My layout" you saved in earlier versions (shared by all games) now appears in each game's button layout list to pick; each game still remembers its own layout. Rebuildable build caches now have a total size limit based on free disk space; the least recently used are removed first. Smaller Mac download. The first time you install an older game to iPhone after updating, its graphics components are rebuilt once automatically, so it takes longer than usual (possibly over ten minutes per game); after that it is back to normal. The S-grade upgrade now adds newer shaders to games built earlier (Mac launcher only for now; Windows later).
v0.4.4 (withdrawn): S-grade full screen, frame-rate unlock and cheats now sit at the top (the gold card in Mac launch settings, the first level of the in-game gear menu on iPhone, and the S-grade card on the Windows export page), and 26 more fixes
S-grade full screen, frame-rate unlock and cheats now sit at the top (the gold card in Mac launch settings, the first level of the in-game gear menu on iPhone, and the S-grade card on the Windows export page). "Picture enhancement": iPhone's "Scaling filter" and Mac's "Enhanced picture mode" are now one setting with three levels: Standard (default, the former bilinear), For 2D games (the former nearest) and Sharp upscaling (MetalFX). Exporting a self-sign package is no longer an "install method": on Mac and Windows, "Export self-sign package" now sits next to "Install on iPhone" in the library and starts with one click; games without an iPhone build, or with an old-format one, are built first and then exported. Cheats you import yourself can be shared with other players (unchecked by default; nothing is shared unless you tick it). The S-grade upgrade now works with NUP and already-unpacked game files. 6 GB iPhones: fixed the next game freezing at start after the previous session ended abnormally (it wrote about 2.6 GB at start and froze within the first frames). Mac / iPhone: fixed some games hitting a GPU fault and being stopped safely mid-game (#1220): a kind of texture that was still in use was being moved out of GPU memory. iPhone: fixed a crash in some games when reading textures (D-TMRP). Fixed whole scenes not showing in some games after they change a depth setting mid-game (seen in 7 games in player diagnostics). iPhone: a game file put into "Import Here" with the Files app is no longer claimed while it is still being copied, and a game file with a damaged table is no longer unpacked anyway — you're asked to import it again (before, the whole game failed to install and retrying didn't help). iPhone: the "Import Here" folder was not created when the interface was in Spanish, French or Japanese. Shaders missed when building are now compiled the first time a game uses them (before, that part of the picture wasn't drawn, the game stuttered or even crashed). Mac: fixed one cause of a GPU hang in some games: drawings using mesh shaders were skipped the first time instead of waiting for the shader to be ready. Fixed community patch categories: some graphics and frame-rate patches were mistaken for full-screen patches and turned on by default (including on iPhone); one of them crashed a game during the opening cutscene of a new save. Some community patches that change sound or gameplay were previously turned on by default. If a community patch can't be read, only that patch is skipped instead of the whole build or S-grade optimization failing. A cheats folder that can't be written no longer crashes the whole game session. Quitting a game normally is no longer treated as "the last session ended abnormally" the next time. Mac: adding S-grade optimization in the background no longer blocks you from starting a game (before, you waited half a minute and then saw "Another task is using the game library"). iPhone: leftover files from an older version that block unpacking a game are now cleared automatically, and when unpacking fails the diagnostics include where it failed. Windows: importing a large Switch 2 game (NUP) no longer fails outright when antivirus or indexing holds a file during the last step; it waits and retries. The Mac launcher no longer downloads updates in the background and installs them when you quit. iPhone: the "My layout" you saved in earlier versions (shared by all games) now appears in each game's button layout list to pick; each game still remembers its own layout. Rebuildable build caches now have a total size limit based on free disk space; the least recently used are removed first. Smaller Mac download. The first time you install an older game to iPhone after updating, its graphics components are rebuilt once automatically, so it takes longer than usual (possibly over ten minutes per game); after that it is back to normal. The S-grade upgrade now adds newer shaders to games built earlier (Mac launcher only for now; Windows later).
v0.4.3: S-grade full screen and frame rate now say what's going on: which patch is in use; if one was turned off automatically, when and whether the game crashed or the picture froze; and if the patch is for another version of the game, which version, and 11 more fixes
S-grade full screen and frame rate now say what's going on: which patch is in use; if one was turned off automatically, when and whether the game crashed or the picture froze; and if the patch is for another version of the game, which version. The S-grade upgrade page now splits games without a patch into "Not in the patch library" and "Patch is for another version", and the latter shows which version the library has and which one you have. Fixed occasional crashes in some games (the same kind fixed in v0.4.1; one more case wasn't covered). Fixed a crash at start in one game: it uses a 16-bit color format that wasn't supported. With a full-screen patch on and anti-aliasing (SMAA) set to medium or high, the picture no longer gets black bars on the sides and squeezed. Fixed sound occasionally cutting out completely until the game was restarted. The safeguard that turns a frame-rate patch off when it freezes the picture now works in regular builds too (it only worked in development builds before). FPSLocker frame-rate patches now cap to the level you picked (choosing 120 fps no longer caps at 60) and only the selected one is applied. iPhone: if importing a game, applying a shader update or tidying a game folder fails partway, the game no longer disappears from the library, and if saves can't be read the original folder is left alone (your saves are still there). iPhone: restoring a save backup that only includes some local players no longer leaves the first player with an empty save. If the S-grade upgrade or switching to a new program fails partway, the previous working program is restored instead of leaving a mix of old and new. Less of a long hitch when some games enter a menu or change scenes: textures needed for the first time are uploaded ahead of time in idle frames.
v0.4.2: Full screen: games with a community full-screen patch use the patch; a few games without one use S2Arm's own full screen (coverage is growing), and 32 more fixes
Full screen: games with a community full-screen patch use the patch; a few games without one use S2Arm's own full screen (coverage is growing). iPhone: each game's settings in the library (and the gear menu in game) add "Sound → Game volume" with five levels — mute, 25%, 50%, 75%, 100% — remembered per game and applied immediately in game, so you can turn the game down while listening to music. iPhone: the screen stays on while a game is in front, so cutscenes and external displays no longer lock the phone; auto-lock works as usual again once you're back in the library or quit. iPhone: the save backup and restore page adds "Quit". iPhone / iPad: the settings page now ends with a "Developer & diagnostics" entry (it used to need a long press on the title); on wide screens such as iPad in landscape the settings page is back to two columns. The self-sign export done page now names the .img files you need to copy this time (the rest are the same as last time and needn't be copied again if the phone has them); the first export after an update shows "Checking games to export" game by game instead of looking stuck. Mac: on Macs with a 120 Hz display, the "Auto" frame-rate level of a frame-rate patch now picks 120 fps, so you no longer need to choose it in launch settings (resolves the Mac part of the v0.4.1 note); levels you picked yourself are left alone. Mac controller panel: long controller names no longer break the panel, and licensed Switch Pro controllers that macOS doesn't recognise (read through the fallback path) are now listed. Fixed a black screen at start in some games since 0.4.0 (S2Arm's own full screen wrote a wrong width, even with full screen off). With a game's adaptive full-screen patch and a fixed-aspect full-screen patch both on, the UI no longer misaligns, shows pink blocks, or gets forced into docked mode and drops frames. iPhone: with a full-screen patch and "Frame generation" both on, black bars no longer flash on every other frame. Some games load extra program modules kept encrypted inside the game files, which used to crash. Some large games crashed at start because they ran out of memory address space: after one such crash, the next launch sizes memory to what the game actually needs and starts normally; oversized records saved earlier are discarded and learned again. Fixed some games quitting right at start (a memory pool the game asked for was larger than the GPU's single-buffer limit). Fixed some games freezing at the same spot again after a GPU hang: the rendering pipeline that caused it is now set aside and skipped next time. Fixed missing objects in some games (draws with an unbound texture slot were skipped entirely). iPhone: on foldable models, motion controls were turned 90° when playing on the inner screen. iPhone: with iCloud saves on, uploading when you switch away from a running game failed every time; it now uploads. The game language menu only offered "Follow system" and English for some games; it now lists every language, so you can pick Chinese on an English system. Putting a game's full .img and its shader update package into "Import Here" together no longer wrongly reports that the phone doesn't have the game, or fails with "couldn't write …"; the update is applied once the game is unpacked. The S-grade card on the export page showed a build hash for libraries made by older versions; it now shows the game version. When pushing a game to iPhone from Mac or Windows, files needed to start the game that are missing on the phone are now pushed again, instead of every reinstall reporting missing files. Windows: building an iPhone package for a game with an FPSLocker frame-rate patch no longer fails as a whole; that patch is skipped (with the reason) and everything else carries on. Windows: fixed "file not found" at the last step of building an iPhone package for some games. Windows: games already unpacked into loose files no longer fail at the unpack step (WinError 1314) without Developer Mode. Windows: unpacking no longer fails when antivirus or indexing briefly holds the folder; it waits and retries. Windows: when changing the library in settings fails, the launcher reconnects to the previous library and shows why under the library row (before, it looked changed and the old library was disconnected). Windows: signing and install errors now name the right cause — the signing server can't be reached, or the iPhone needs pairing again — instead of a generic "check the device connection". Windows: the S-grade upgrade scan now includes the bundled patches. Language fixes: S-grade upgrade buttons are no longer cut off in English, Japanese and French; a Spanish settings button is no longer cut off; the "Update" label on the export page (Japanese, Spanish, French) and the "Import keys" capitalisation (Spanish, French) are corrected; a few leftover Chinese strings in the Japanese interface are now Japanese. When a game has frame-rate patches from several sources, only one set is turned on per level (ones S2Arm has checked come first) instead of stacking them. When a game crashes with patches on: if the crash is in S2Arm's own code, the first time S2Arm no longer turns your patches and cheats off — it just notes it, and only turns them off if it crashes again with the same set. Lower rendering overhead: depth snapshots are no longer rebuilt every frame when a pass alternates between two depth buffers.
v0.4.1: The Mac and Windows launchers now come in Traditional Chinese, Japanese, Spanish and French; S2Arm on iPhone (library, in-game settings and its page in the system Settings app) adds Japanese, Spanish and French, and 14 more fixes
The Mac and Windows launchers now come in Traditional Chinese, Japanese, Spanish and French; S2Arm on iPhone (library, in-game settings and its page in the system Settings app) adds Japanese, Spanish and French. Fixed a crash in some games while loading graphics resources (Mac and iPhone). Fixed games crashing right after you pick them on some iPhones (more common when opened through LiveContainer, but normal installs could hit it too). Windows: the whole window no longer freezes when you click "S-grade upgrade" or open "Cheats…" from a game's menu. Windows: without Windows Developer Mode turned on, "Update S2Arm on iPhone" and the S-grade upgrade no longer fail to add S-grade enhancements to every game. iPhone: with "Frame generation" on, switching games or turning a frame-rate patch on or off mid-game no longer occasionally crashes or flickers. iPhone: with "Frame generation" on, 120 fps patches were held at 60 fps. Mac: grey "S2ArmGame" icons no longer show up in Launchpad and Applications; old ones are cleared after you play once. Mac: licensed third-party Switch Pro controllers that macOS doesn't recognise (read through the fallback path) no longer have sticks that move several times too slowly, menus respond to them, and the player lights work. H.264 video in Switch 2 games now plays (decoding wasn't hooked up before, so some games flickered or stopped right at the start), using the device's hardware decoder. Export page S-grade card: for games not unpacked yet, a full-screen patch for the same version is no longer described as "another version, will try to adapt it". Self-sign export: game .img files that haven't changed are reused from the last export and only the changed ones are rewritten, so adding one game exports much faster. When a patch crashes the game, S2Arm no longer turns everything off at once: it first turns off only what you turned on since the last clean exit, then unverified ones, and only turns everything off if it crashes again, so you don't have to turn things back on one by one. Lower rendering overhead in a few places: transient render targets no longer rebuild their views and framebuffers every frame, timing counters no longer read the clock on every draw, and write tracking looks up ranges with an interval index. A few games packaged with an older S2Arm version may freeze on the screen at a certain scene (stuck while preparing graphics effects).
v0.4.0: Games you've already exported get S-grade enhancements without rebuilding, and 22 more fixes
Games you've already exported get S-grade enhancements without rebuilding. New: S-grade enhancements (Beta). Frame-rate patches: games locked to 30 fps run at 60 when a patch exists; games with a 120 fps patch present at 120 Hz on Macs with a high-refresh display when you set "Frame rate level" to "120 fps" in launch settings; on iPhone in this release, turn off "Frame generation" in the in-game gear menu to reach 120 Hz. Both will happen automatically in the next release. Full-screen patches: the picture fills your screen at its own aspect ratio; when a game has patches for several aspect ratios, the one closest to your screen is picked automatically, without stretching. Cheats: toggle each one from the in-game quick menu and game settings on iPhone, or from the launch settings on Mac; active ones are marked "Applied". If a patch crashes the game, it turns itself off: the next launch turns off the patches and cheats that were on at the time and shows one notice saying which ones — no digging through settings. Unified settings: frame-rate, full-screen and graphics patches and cheats now live in one "S-grade enhancements" group in settings, showing which patch is in charge. The Windows launcher has S-grade enhancements too: the gold card on the export page, "S-grade upgrade" and the gold S in the library, and viewing / importing cheats from each game's menu. Choose the game language yourself, per game: in launch settings on Mac, or under Settings → Language in the game on iPhone. The Windows game library can live on a NAS or network drive: mapped drives keep their drive letter, and \\\\server\\share paths work too. Redesigned controller panel on Mac: up to 8 players and 8 controllers at once, mixing Switch 2 controllers and Bluetooth controllers. What's new: the first time you open a new major version on Mac or Windows, a multi-page window walks you through S-grade enhancements; on iPhone, the first visit to the library shows a 3-page guide to where settings, cheats and problem reports are. Redesigned in-game settings on iPhone: a single column with just Screen, Graphics, S-grade enhancements and Language. Frame generation on iPhone: games that run at 30 fps and have no frame-rate patch are shown at 60 fps by default, for smoother motion; the game's own pace is unchanged. Fixed several problems that blocked play: black screens and wrong rendering (including a fully black screen when an .img comes without its shader library); graphics memory that kept growing during long sessions; audio dropping out after a stutter, and a frozen game blocking system audio; export failures (missing shader bytes failing the whole export, library paths containing square brackets, copying across disks after moving the library, and a tight space estimate stopping the export); games without a camera hanging at startup; a crash when exporting diagnostics on iPhone; and exports from an incomplete install now say to reinstall over it. Exporting S2Arm and installing games to iPhone: games you removed from the library are no longer included. Mac controllers: motion on some Switch-compatible Pro controllers no longer stays at zero after disconnecting and reconnecting (thanks @lirc572, PR #1092). S2Arm's own generic 60 fps is removed: games with a frame-rate patch use the patch. Graphics patches (higher resolution etc.) are only built into the Mac version, not the iPhone version: phones have less memory and higher resolution can get the game closed by the system. Mac launch settings now have "Audio latency": Standard, Low and Lowest (default Standard, same as before). Mac 0.3.5 to 0.3.9 can update to v0.4.0 in-app — no need to download the dmg (the in-app update that used to roll back is fixed in this version). Faster shader translation (about 2.6 ms less per frame in the game we measured). A few games packaged with an older S2Arm version may freeze on the screen at a certain scene (stuck while preparing graphics effects).
v0.3.10: All fixes in this release are in the app itself: just update the app, no need to re-export games, and 21 more fixes
All fixes in this release are in the app itself: just update the app, no need to re-export games. This time, please update by installing over the old version: on Mac, download the dmg from the release page and drag S2Arm into Applications to replace it; on Windows, run the installer (setup.exe) into the same location. Correction: the v0.3.7 notes said "once you are on this version, future in-app updates work normally" — that was wrong, sorry. Fixed games all showing as "not exported" after upgrading, for users who changed their game library location back in 0.2.x: from this version on, an old library that still has games is no longer dropped from the list. Fixed some games crashing mid-play on iPad (texture read out of bounds). Game libraries on exFAT drives: saves no longer fail because of the "._" companion files the system creates. Implemented a display service command some games need, which previously kept them from starting. Fixed some games (built with newer SDKs) hanging or crashing while loading modules at startup. Fixed some large games freezing during NPC dialogue or close-ups: when the shader compile service stalls, the game waits briefly, skips that frame and keeps going. Exporting for a phone newer than the Xcode on your computer is no longer blocked: if its graphics chip isn't recognized, a universal package is built as usual. Removed another batch of up-front checks that blocked things that could actually proceed during export, install and transfer: a resource pack list missing its checksum field is computed from the actual files; in a multi-game container, games without a local resource pack are skipped instead of blocking the whole install; if the target device's chip / OS can't be read, a universal package is built as usual; transfers are retried while the phone is locked; a large-file transfer that drops once is retried automatically. Diagnostic runs capture more: integer-format render targets are now saved with their actual values (previously always black), and 3D textures are laid out layer by layer, helping us track down black-screen issues faster. Fixed some Switch 2 games crashing shortly after starting (video decoder initialization from newer SDKs wasn't handled). Fixed resource-pack transfers failing with "write denied" when old files on the phone had become read-only: the old file is now deleted and rewritten; if it really can't be deleted, the phone's own reason and next step are shown. Fixed, at the root, some files becoming read-only after a game was moved to another location on the phone (which later blocked transfers or saves): moved files now get their write permission back. On Windows, when signing can't reach the signing server, it's now reported as such and retried automatically, instead of a generic failure. Fixed some games staying on a black screen without drawing a single frame (async requests to the in-game shop / network services never got their "done" signal). Fixed some large games being killed by the system the first time they enter actual gameplay (out of memory): the right memory mode is now picked for your device on the very first run instead of after one crash; if memory really is too small, the game still starts and shows a one-time notice. New "Report a problem": at the bottom of the gear menu on every iPhone / iPad screen and in the diagnostics upload on the computer. Fixed text input boxes in some Switch 2 games (naming, entering text) reading their settings wrong and not accepting input. Fixed game covers in the iPhone library showing as small square images: a single network drop or timeout used to stop fetching the wide cover for 7 days; now it only stops once the store gives a definite answer, and the cover is filled in on your next export or install. Fixed some games crashing at the first-time setup screen (a few spots in the game code leave the stack misaligned, which Switch ignores but Apple devices check).
v0.3.9: Fixed some large games inside multi-game containers launched from the library crashing after 2–4 minutes of play: the container couldn't read the game's recorded address-space needs and reserved only 3 GB, so it ran out and crashed; it now reserves space based on the game's own record (or its own layout needs if it hasn't been played yet), and 4 more fixes
Fixed some large games inside multi-game containers launched from the library crashing after 2–4 minutes of play: the container couldn't read the game's recorded address-space needs and reserved only 3 GB, so it ran out and crashed; it now reserves space based on the game's own record (or its own layout needs if it hasn't been played yet). Further fixed "phone is plugged in but not recognized": if the computer can see the phone, it now just installs instead of blocking in advance based on pairing / online / Developer Mode status; if the install really fails, the system's reason and next step are shown. Fixed Windows self-sign exports failing at step 4 "Write install notes" with permission_denied after several GB had already been written: if the old export folder is held by Explorer, the self-sign tool or antivirus, it now waits and retries; if that still fails it writes to a new time-stamped folder, succeeds as usual and tells you the new location. If the resource pack has no shader library (for example when the game.img from the resource pack folder was copied in directly), the game no longer stops at "Game files are missing" on launch: it plays as usual and compiles shaders the first time they're needed, which may stutter for the first few minutes. Several actions are no longer blocked in advance: deleting a game from the phone works even if this computer has no record of it (installed from another computer); on Windows a missing bundle ID is derived from the current account; choosing a whole drive or your home folder as the storage location now creates an S2Arm folder inside it; importing an update is no longer rejected by version number up front — the content is checked after unpacking and you're only told if it's really wrong.
v0.3.8: Fixed: on Mac, an iPhone connected by cable and paired showed "can't read connected devices" or "not paired with this computer yet", so installs couldn't start, and 7 more fixes
Fixed: on Mac, an iPhone connected by cable and paired showed "can't read connected devices" or "not paired with this computer yet", so installs couldn't start. Fixed first-time installs of the standalone app (alternative export path) with a free Apple ID: when the phone had not trusted the developer yet, the computer could not open the app, but the install still reported done and the game was missing resources. "Send to developers" no longer hangs on "Uploading…": uploading (including packing, in the launcher) is limited to 90 seconds, after which the reason is shown with "Try again / Export diagnostics"; you can also cancel during the upload. Diagnostic packages now include only the latest 50 tasks' records and logs, so long-time users no longer hit "more than 1000 files" or failed uploads. Exporting diagnostics now waits until the export has actually finished; a single oversized log or one being rewritten during export no longer makes the whole package fail. Fixed Windows exports of multi-program collections for iPhone failing at "Build app and sign" with "prod.keys not found" (exit code 75): the keys you imported are now used when unpacking the other programs from the original files. Fixed Windows installs failing at signing with "No account selected": if Impactor has one saved Apple ID that isn't selected, it's now selected automatically before signing; with several saved IDs, the pre-install check says none is selected and offers to open Impactor. Games with DLC no longer pile up an extra DLC unpack cache after every launcher update: exporting now removes the older caches for the same game and keeps only the latest.
v0.3.7: Mac: if "Update and restart now" fails with "the app did not quit, nothing was updated" (update_app_busy), download the dmg from the release page and drag S2Arm into Applications to replace it once, and 7 more fixes
Mac: if "Update and restart now" fails with "the app did not quit, nothing was updated" (update_app_busy), download the dmg from the release page and drag S2Arm into Applications to replace it once. Fixed Mac in-app updates getting stuck because the old version never quit (update_app_busy): the launcher now quits by itself after the update dialog closes; if the old version still does not quit, the updater ends it; and if it cannot wait for the exit, the downloaded update is kept so the button stays available without re-downloading. Fixed installs failing with "No profiles … were found" when using a free Apple ID (personal team) for the standalone app of the alternative export path: free accounts no longer request the "Extended Virtual Addressing" entitlement they can't use, and if a profile still can't be created, Xcode's first reason is shown directly. If the resource pack check reports "SHA does not match index" during install, retrying now recovers instead of failing every time. Installing no longer fails with "local task failed" when the save file list is missing a field. Game libraries on exFAT drives: "._" companion files next to device records no longer make library refresh fail. Fixed exports failing every time with "… is not in game.img's RomFS section or the overlay" after a previous export was cancelled, the launcher was closed or the process was interrupted while writing the game image: incomplete output is now cleaned up so the next export writes it completely. Fixed some games crashing at the name-entry step right after starting.
v0.3.6: This version updates shader translation: the first export of each game after updating re-translates its shaders and takes longer than usual, and 28 more fixes
This version updates shader translation: the first export of each game after updating re-translates its shaders and takes longer than usual. One-tap diagnostics upload: click "Upload to developers" in the Mac / Windows launcher (or "Send to developers" on iPhone / iPad) to get a short code starting with D-, and paste it into your GitHub issue — no need to send the diagnostics file by hand. Mac: controllers can "remember this device" — pair once by holding SYNC, then press any button to reconnect. iPhone Duo: mirrored reflection and crease transition effects. Both launchers now have a "Report a problem" button at the top right of every page for one-tap diagnostics upload; error messages point to it too. The Mac / Windows launcher's interface language follows the system by default, and remembers your choice once you pick one. When installing games, S2Arm on the phone is no longer re-signed and reinstalled if it hasn't changed, so updates are faster. Mac: the direct renderer can now use a fixed output size. Virtual controls can now be scaled up to 4x. Fixed particle effects being hidden entirely. Fixed screen corruption and the screen gradually turning green in some games. Fixed overly dark intros in some games. Fixed one cause of some games showing a pink / purple screen with sound but no picture. Fixed some games crashing before the first frame on A16 devices. Fixed several causes of games crashing mid-play or failing to start. Fixed the whole game freezing during scene transitions. Fixed export failures in some games, and Windows exports getting stuck at shader extraction for hours. After switching game libraries, the second line of "Storage overview" no longer keeps showing the old library's path, and importing the same game after creating or opening another library no longer writes back to the old location. Fixed another export problem with game libraries on exFAT drives. Mac: games no longer lose text you type when naming characters or entering text. More reliable controllers: the Switch 2 Pro Controller no longer disconnects on its own and reconnects automatically; single Joy-Con directions are more accurate; on Mac, controller input no longer lags while the interface is busy; the vibration test in the menu now goes to the connected controller. Fixed overlay switches not showing after restart on iPad mini. Fixed some large games on iPhone / iPad slowing down, freezing and writing heavily to storage after playing for a while: the memory backing file is now only used when this device actually needs it. After installing or updating a game, the first launch no longer wrongly asks whether to send diagnostics for an unclean exit. Fixed a texel-buffer read misalignment that caused flickering in some games. Fixed one cause of some games crashing at launch (store service calls completed). Fixed games on Mac stuttering again every time they were opened. On devices without BC texture support, some textures are now decompressed on the GPU, using less memory and loading faster. Fixed one cause of some games crashing mid-play on iPhone / iPad / Mac (deeply nested graphics commands no longer overflow the stack).
v0.3.5: If "Update and Restart" did nothing for you, download the dmg from the release page and install it over the old one once; updates will work normally after that, and 18 more fixes
If "Update and Restart" did nothing for you, download the dmg from the release page and install it over the old one once; updates will work normally after that. This version updates shader translation: the first export of each game after updating re-translates its shaders and takes longer than usual. "Export and sign it yourself": on Mac / Windows you can export an unsigned S2Arm.ipa and game images and install them on iPhone / iPad with your own signing. S2Arm now shows only the latest item when it opens (new version, what's new in this version, important notices); older ones are not shown again and stay in Messages. iPhone Duo split screen: the game on the top half, virtual controls on the bottom half, with its own editable layout. When adding a game with only an update or DLC and no base game, S2Arm now tells you right away what is missing. Fixed switching libraries and exporting on Mac failing when the game library is on an exFAT drive. More reliable in-app updates on Mac: two update checks running at once no longer break each other, failed updates now leave a log, and leftover update files are cleaned up after a manual install. Fixed some games having sound but no picture, and some stopping right at launch. Fixed wrong motion-control (gyroscope) axes on iPhone Duo. A false checksum mismatch in DLC data no longer blocks exporting. Windows: installing to the same phone a second time no longer fails; the installer now closes S2Arm / Impactor if they are holding the install folder. If the game files were modified and don't match the game package when installing, the error now says what's wrong. The shader cache is no longer mistakenly marked as "stopped writing" after a normal session end. Lower power use for audio: no more idle wake-ups every 5 ms, and faster audio processing on Apple silicon. Fixed wrong free-space readings on the phone (Settings showed tens of GB free, but S2Arm said only a few GB); free space is now measured the way the phone actually has it available. Fixed exports of some large games using tens of GB of memory and taking forever; computers with less memory can now export them too (tested with Ori 2 and The Witcher 3). Faster extraction of fully compressed files during export. Lower GPU load in some games, by about 3–4%.
v0.3.4: Fixed some large games that could no longer be opened after updating to v0.3.3
Fixed some large games that could no longer be opened after updating to v0.3.3.
v0.3.3: Fixed: on Windows, the last export step failed when the game library was in a protected folder (such as the Xbox games folder), and 16 more fixes
Fixed: on Windows, the last export step failed when the game library was in a protected folder (such as the Xbox games folder). Fixed some games (such as ones using the store service) crashing immediately on launch on iPhone / iPad. Windows: tapping Settings on the welcome page no longer crashes the launcher. iPhone / iPad: on devices without BC texture support (A16 and earlier), the Vulkan graphics layer now decodes such textures instead of crashing. Fixed memory steadily growing during long play sessions in some games until the app crashed. Install to phone: push failures now show the specific cause, a failed streaming transfer retries another way, and old-format resource packs ask you to re-export. Windows: installing to the phone or updating S2Arm on the phone with a developer certificate no longer fails when Apple's timestamp server can't be reached. Fixed some games being unable to save (or getting stuck at saving) because their control data doesn't declare a save size: the account save is now added at export and the host also falls back at launch. Install to phone: when the estimated free space on the phone looks too small, you can now choose to continue anyway — it only stops if the phone actually fills up; free space now counts purgeable space. iPhone / iPad: when S2Arm's game or resource folder can't be written, readable files are migrated and unreadable ones skipped, instead of giving up and leaving the library unusable. Mac: a background helper error during export no longer pops up the "S2Arm quit unexpectedly" system dialog. Clearer extraction errors: a failed data check names the file and part (base / update / DLC); an access-denied error says whether it was S2Arm's own work folder or the game file, and points to Windows Controlled Folder Access or antivirus software. iPhone: new "Play sound in Silent Mode" setting (off by default). The computer no longer goes to sleep while exporting or pushing to the phone. The performance overlay's "GPU busy" reading no longer shows inflated values above 1000 ms/s. iPad / iPhone: fixed flicker in some games caused by textures being rebuilt from zeroed storage after the GPU had written them. iPhone / iPad: diagnostic packages exported from a multi-game package now identify which game was being played.
v0.3.2: Saves: after upgrading from 0.2.4–0.2.9 to 0.3.x, the first launch of a game no longer treats the save written back by the old version as a newly added save and replaces your current progress, and 14 more fixes
Saves: after upgrading from 0.2.4–0.2.9 to 0.3.x, the first launch of a game no longer treats the save written back by the old version as a newly added save and replaces your current progress. The disk space estimate no longer blocks computers that can complete the export: space is freed while the game image is written, and old iPhone packages count as reclaimable space. Mac: the game library can now be on an exFAT external drive. Windows: exports no longer fail when game resources can't be moved into shared storage, the original error is no longer cut off, and intermediate files are cleaned up after stopping when the library and data are on different drives. Adding a game no longer fails with "the cover could not be written to the library" (File exists); if the cover can't be written, the game is still added. Retrying a game deletion no longer removes another game's folder by mistake. Windows: S2Arm now starts normally when its data folder's permissions can't be tightened or when the data folder is a junction to your user folder. Windows: games with interface overlays no longer pick up another game's original files, so writing the game image no longer fails because of it. iPhone / iPad: on devices without BC texture compression support (A15 / A16 and earlier), games using the GL graphics layer no longer crash on launch. Installing to iPhone no longer gets stuck at 99%: it completes once the transfer finishes instead of waiting for the phone to unpack. iPad / iPhone: fixed a crash on every launch after the game was killed once during startup. iPhone: launching a game whose image hasn't finished transferring now asks you to install it to iPhone again instead of starting with no data. Windows: the progress bars for writing the game image, verifying source files and seeding show again on the export page. Lower memory use when exporting Unity games on computers with less memory: assets are unpacked one at a time, and the direct-library fallback no longer fails along with it. Mac and M-series iPad: a class of game threads in some games (mainly Switch 2 titles) is no longer scheduled at a lower priority, noticeably reducing long stutters.
v0.3.1: Fixed exports of larger games on Windows failing at the last step, writing the single game image (game.img)
Fixed exports of larger games on Windows failing at the last step, writing the single game image (game.img).
v0.3.0: Exports now deliver a single game image, and 100 more fixes
Exports now deliver a single game image. 60 fps is now opt-in per game. iOS display settings are now saved per game instead of applying to every game. iOS home-screen quick actions are now "Export diagnostics" and "Settings", and they work from the library; save management moved to long-pressing a game card ("Manage saves…"); the performance overlay uses one switch in both library settings and in game. Mac: local multiplayer with several controllers in the game window (2 / 4 players); Joy-Con can be split into separate slots. iPhone / iPad now support several local controllers too: system controllers are assigned to 1P–4P in connection order and return to their slot after reconnecting; rumble and motion currently go to 1P only. Controller button layout can be set to Auto / Switch / Xbox for all games; Auto follows the letters printed on the buttons. Local players: switch players from the top of the iPhone / iPad library or the Mac launcher's top bar; each player has separate saves for the same game, and existing saves belong to the first player. The landscape game library is now a cover-flow deck you can drag and fling. The launcher and in-game menu show the specific Switch 2 controller model. Folder paths shown in the launcher are now clickable and open in Finder / File Explorer. The S2Arm version is now shown in the Mac / Windows launcher top bar and at the top of the iPhone library and in its settings, so a screenshot shows which version you are on. Mac launch settings gain "Game language": follow the system or pick a language; it applies the next time you start the game. Launcher entries tidied up: "Environment check" in the top bar is now "Settings", which also holds the interface language; the library, iPhone packages and disk space are together under "Storage locations"; clicking the brand name returns to the welcome page; one-click export on the Mac welcome page opens the same export page as the library. New Mac game launch page: a cover card with two stages; errors show one plain sentence and the next step, and a game that quits on its own while running is reported as a crash. When a button is greyed out because another task is running, hovering over it tells you which task it is waiting for; on Mac, changing covers, freeing space and save actions also show what they are waiting on. New 5.1 downmix option for audio on Apple devices; default behavior is unchanged. The game's preferred language list in iOS Settings now shows every available language. Diagnostic bundles now use a short file name, easier to attach to reports. Mac / Windows launcher: when S2Arm on your iPhone is older than the launcher, an "Update S2Arm on iPhone" button appears at the top of the library. When a fix lands in the game-code rewriter, affected games only have the rewritten parts replaced, applied with "Update S2Arm on iPhone" or at the next game start, with no re-export and no resource re-push. How to install to iPhone is now a single card in the environment check, where the signing identity is set; the export page shows one line with the current install method and a "Change" button. If pushing a game image to the device is interrupted, the next install resumes where it stopped instead of starting over. Self-signing / sideloading players can copy game.img into the "Import Here" folder of S2Arm in the Files app; it is picked up automatically when the library opens, when the app returns to the foreground, or on "Check again". The Mac installer (DMG) has a new drag-to-install window. New Windows installer: installs for the current user with Start menu and desktop shortcuts, can be uninstalled from Windows without touching game data, and matches the Mac installer's look; the main Windows button on the download page now gets the installer, with the zip kept as the "portable" option. Smaller downloads: the Windows build no longer bundles an extra copy of .NET and drops unused Git components; the Mac build keeps only the Apple silicon signing tool. With 60 fps on, if the device temporarily can't hold it you are told the game is back at its original frame rate; it retries automatically and tells you when 60 fps is restored. Automatic updates now download new versions from the official download site (dl.s2arm.com) and fall back to GitHub if that fails; either way the download is checked against the signed manifest. Installing to iPhone no longer stops when something is uncertain: if the games on the phone can't be read, or whether S2Arm is installed can't be determined, the install goes ahead; when saves can't be backed up before overwriting, other games on the phone need rebuilding for the new version, or games installed from another computer would be dropped, you are told the consequence and can confirm to continue; if the resources are already on the phone and only unpacking is left, the transfer counts as done and you are reminded to open the app to finish. Mac launcher: deleting a game / clearing cache now responds immediately and never stops halfway; device connection status matches reality; devices that had S2Arm self-signed before can use one-click install. Touch input on iPhone / iPad is now also recognized by games as gestures. Fixed controller rumble not working on some iOS devices. Safe stubs for unimplemented graphics functions are now decided by who calls them, fixing at the root the 0.2.8 issue of taking over functions from a game's own libraries. Switch 2 games: fixed a final boss fight dropping to 1–2 fps (#41) and another game crashing when reading a specific address (#351). The on-device shader cache moved to a location excluded from iCloud backup; the old cache is moved over automatically on first launch. The launcher now checks for updates via a signed version manifest on the official site first and falls back to GitHub, so update checks work even when GitHub rate-limits the connection. iOS library: deleting a game responds immediately, runs in the background, and tells you how much space was freed. iOS: fixed the app being terminated by the system about 10 seconds after going to the background. iOS: overlay switches in Settings now take effect after relaunch. Automatic quality tiers no longer change docked / handheld mode; the mode is always your own choice. Switch 2 controllers: reconnecting a remembered Joy-Con 2 also looks for the other side, and a failed link no longer stops scanning; on Mac, a controller connected in S2Arm after the game has started now reaches the game. Apple devices now report 5.1 support based on the actual number of output channels. A Switch 2 game: fixed black patches on island vegetation and incomplete models near the coast. Fixed some games' exports staying on "Preparing resources" for a very long time. Exporting failed for games whose program has no resource section (NCA section 1 does not exist); they now export with empty resources. Games that only support Polish or Thai are no longer treated as having no language and falling back to English. Windows: multi-program collections could not be exported for iPhone (#613); importing NSZ wrote temporary files to the system drive and failed when it was full (#612). The pre-export space check now uses the drive that is actually written to, so an external storage location is no longer checked against the wrong drive; NUP games no longer have their required space overestimated twofold. Store banners could not be saved when the library was on an external drive. When the launcher reports a problem with its built-in engine on first launch, it now shows the actual git error instead of always asking you to reinstall. Mac: fixed installs to iPad failing when the device information contained invalid characters. Windows installs no longer look for the signing tool in Desktop / Downloads, so a same-named program there can't be picked up. Save folder: changes are detected by content; the first save you drop in no longer has folders stripped by mistake; write-back keeps the user ID so the game doesn't treat you as a new player; an interrupted write-back is recovered on next launch. Windows launcher: pages such as export and library no longer jump down or back to the top every second. Batch export: a batch paused for a full disk can no longer be resumed by mistake, only retried; games with platforms still pending count as unfinished. Export progress now only moves forward instead of jumping back (for example from 91% to 40%). Exporting now works when the storage location is on an external drive; most writes go to that drive and the system drive only needs a small fixed amount of space. When unpacking Switch 2 NUP games, files that are identical in the base game and the update are written only once, so exports need much less space. For games with a very large number of shaders, export re-checks free space by shader count before translation starts, so it no longer fills the disk halfway through. Large games no longer sit on "Extracting" for a long time during export; the extraction step no longer opens every file one by one. Old-version leftovers and remnants of interrupted runs in the export cache are now cleaned up automatically. After an automatic launcher update, the unpacked files, deltas and downloads of earlier versions are deleted instead of taking up another full copy on the system drive each time. "Free up space" now shows how much deleting each item alone would free, and the total follows your selection without counting shared data twice. Adding games recognizes Switch 2 .nup files: the Windows file picker shows .nup and has separate buttons for files and folders; on Mac, dropping a .nup on a game card is no longer treated as a save. The Mac launcher's storage location now shows the full path instead of just the volume name. Mac batch export: installing automatically after the batch is no longer blocked, and an export started separately during a batch runs after the batch finishes. With several devices connected, installing, re-signing and "Update S2Arm on iPhone" only target the device you selected; if it is offline you are told directly, unpaired devices are named as such, and you are told to plug in or join the same Wi-Fi. Install failures explain themselves: if unpacking fails on the phone, the app's reason is shown right away instead of reporting "unpacking did not start" after 180 seconds; install / import failures on iPhone / iPad show one sentence and the next step; if the app cannot write to a game folder it says why and moves to a new folder automatically; library cards say what they are waiting for, and games with data no longer disappear silently. Mac: after a large push is interrupted, S2Arm no longer falls back to a system transfer that reads the whole file into memory and could freeze the Mac; it asks you to reconnect and install again, resuming next time. Windows: adding games failed when the private folder was owned by another account; it is now repaired in place, and if that is not possible you are told how to recover. Windows first run: "Open official page" for the Metal compiler now goes straight to the download section, and the welcome page has step-by-step instructions. iOS: the file pickers for cheats and cloud saves now open in their folders instead of hanging on "Recents"; game resources moved out of the folders visible in the Files app to a location excluded from iCloud backup, and existing ones are moved on first launch. Lower game audio latency on Apple devices; the extra 64 ms start-up buffer is no longer applied. Mac: fixed a game crashing randomly after 10+ minutes of play (#668), and some games quitting after a while because the GPU was wrongly judged to be hung (#647). Mac direct mode: the first time new visuals appear, the frame no longer stalls waiting for shaders, so hitches are much shorter; also fixed two cases of flicker caused by reading stale image content. Fixed a racing game crashing on entering a race on iPhones without BC texture support (such as A16 models). Fixed a game's intro video freezing on a dark frame. Fixed a game stuck on its "connecting" loading screen: when offline, the account selection step now fails as on real hardware, and the game continues offline. Switch 2 games: fixed a game crashing when it sets a target frame rate (#679), and another game flickering with models popping in and out the first time a new area is entered (#674). Fixed a game that exported fine on Mac but crashed after launch. Content drawn with polygon primitives is no longer dropped. Export: games whose code happens to contain certain bytes no longer end up with no direct library (#477); a shader without an entry point is now skipped instead of failing the whole export (#518). Rewriter: functions that keep using data below the stack pointer after restoring it are no longer rejected wholesale. Rewriter: when an instruction that computes an address from its own location (adr / adrp) sits inside a jump table sequence, it is now re-encoded for its original target when moved into the patch area instead of being recorded as a rewrite gap. Windows: building large games failed with an out-of-memory error (MemoryError) while extracting shaders. A Switch 2 game stopped during the "refresh" step (NRR hash table out of range). A sports game showed black patches on the near-shore water. Garbled edges in in-game videos. Includes all fixes from v0.2.9 (#602 and others). Android now always uses the direct graphics path and no longer falls back to the generic backend. Four-finger long press opens a touch menu: drag to edit the virtual controller layout (saved per game) and toggle touch passthrough; the menu is now available in Chinese. Built-in joystick-like sensors are no longer treated as a connected controller, so the virtual controller is no longer hidden. Games whose modules come in the imported package now start on release builds, and the game screen is locked to landscape. Automatic quality tiers, frame-rate notices and thermal / power-saving downgrades now work on Android. Community patches are now included in Android packages. Direct graphics coverage and fixes: games built with SDK 10 or earlier no longer abort at launch; buffer / texture copies support more formats (#537); binding only a compute program no longer replaces the draw program (#538); indirect draws and indirect compute dispatch are wired up (#574); replay state is kept across submits (#539); a failed clear submit no longer frees commands the frame queue still holds (#572). Exporting Android packages on Mac now passes signature verification with a Homebrew-installed JDK. The touch menu can switch between handheld and docked mode; it applies immediately when the running game allows it, otherwise at the next launch. Game threads in multithreaded games are no longer all squeezed onto one CPU core, fixing a 3D game running at only a few frames per second on its title screen. Windows: when updating from an older version inside the launcher while Impactor is running, the update fails and the button goes back to "Update and restart".
v0.2.9: Exporting always failed for some games whose data is entirely in the executable part (empty RomFS), and 5 more fixes
Exporting always failed for some games whose data is entirely in the executable part (empty RomFS). Fixed some games exiting right after launch, before the first frame, on 0.2.8. Fixed Balatro crashing after launch, along with graphics parameter errors in some OpenGL games. Windows: adding a game kept failing with "the game library is not ready", even after choosing another location. Windows: if RUST_LOG (for example warn) was set in the system environment, installing to iPhone was reported as failed even when it succeeded. Fixed an occasional crash on iPad / iPhone after playing for a while, when reading game data failed with "Bad address" (#602).
v0.2.8: fixes for garbled game names on Windows, getting stuck adding the first game, and more
Fixes game names turning garbled on Chinese and other non-Western Windows systems after v0.2.7 (restored automatically on update), several stumbling points when adding the first game and installing to iPhone for the first time on Windows, and some OpenGL games crashing at launch because a graphics function was missing.
v0.2.7: fix for game imports failing on non-UTF-8 Windows systems
A single-fix release: on Windows systems whose text encoding is not UTF-8 (for example English Windows), the game library index was written incorrectly and every later import failed.
v0.2.6: full-screen external display, ground artifact fixes and export disk space
Native full-screen output to an external display from iPhone; fixes for bright patches, stripes and black patches on the ground in some 3D games; much less temporary disk space when exporting large games, with an early stop and a clear message when space runs short.
v0.2.5: PlayStation confirm button, Switch 2 Chinese and a voice-audio crash fix
PlayStation controllers now confirm with × and go back with ○; Switch 2 games show Chinese again on Chinese systems; fixes for some games exiting during voice audio and for an incomplete library move when upgrading on Windows.
v0.2.4: batch export, save folders and game language
Export several games in one go, copy saves as-is between Mac and iPhone, and game language now follows the device's primary language.
v0.2.3: auto-update, install and memory fixes
Fixes repeated Windows auto-update failures, install error 9401 and exports running out of memory, and adds signing with your own developer certificate.
v0.2.2: export results, save protection and covers
Fixes exports reported as failed despite succeeding, possible save loss when reinstalling on a locked phone, and an empty library after installing to iPhone.
v0.2.1: fix for an empty Windows library after upgrading
Fixes the Windows library appearing empty after upgrading from 0.1.x; existing games and keys are reconnected automatically.
v0.2.0: rebuilt game library, host-only updates and iCloud save sync
The game library supports multiple storage locations, games already exported no longer need re-exporting after an S2Arm update, and Mac launch settings and iCloud save sync are added.
v0.1.7: Windows deep-path builds and launch fixes
Upstream addresses a class of Windows long-path failures and improves iOS 26.0 launch handling, diagnostics and installation feedback.
v0.1.6: Path regression, signing teams and space checks
Fixes a path-comparison regression introduced in v0.1.4 and adjusts Windows job records and Mac signing-team detection.
v0.1.5: macOS 15 tool compatibility and custom covers
Lowers bundled tools’ minimum OS requirements, fixes Windows extraction and Chinese paths, and adds game names and covers.
v0.1.4: Library location and save protection
Adds a configurable library location, corrects link handling during cleanup and updates controller and installation behavior.
v0.1.3: In-app launcher updates
The launcher checks GitHub for releases, verifies signed update metadata and updates after confirmation.
v0.1.2: Installation outputs and launch fixes
Preserves Windows installation outputs to fix container_stale and addresses memory checks and launch crashes.
v0.1.1: First-release setup and export fixes
Improves Windows setup checks, Mac extraction and error summaries, and enables Windows diagnostic export.
v0.1.0: First public release and requirements
S2Arm publishes graphical launchers for Mac and Windows with one app for the game library.